Skip to main content

which vSphere version is my VM running on?

(an update of an older post, now complete up to vSphere 6)

Your Linux runs on a VMware VM, but which on which ESXi version? You can see for yourself: run "dmidecode" and look at lines 10, 11 and 12.
ESX 2.5 - BIOS Release Date: 04/21/2004 - Address 0xE8480 - Size 97152 bytes
ESX 3.0 - BIOS Release Date: 04/17/2006 - Address 0xE7C70 - Size 99216 bytes
ESX 3.5 - BIOS Release Date: 01/30/2008 - Address 0xE7910 - Size 100080 bytes
ESX 4 - BIOS Release Date: 08/15/2008 - Address 0xEA6C0 - Size 88384 bytes
ESX 4U1 - BIOS Release Date: 09/22/2009 - Address 0xEA550 - Size 88752 bytes
ESX 4.1 - BIOS Release Date: 10/13/2009 - Address 0xEA2E0 - Size 89376 bytes
ESXi 5 - BIOS Release Date: 01/07/2011 - Address 0xE72C0 - Size 101696 bytes

ESXi 5.1 - BIOS Release Date: 06/22/2012 - Address: 0xEA0C0 - Size: 89920 bytes
ESXi 5.5 - BIOS Release Date: 07/30/2013 - Address: 0xEA050 - Size: 90032 bytes
ESXi 6 - BIOS Release Date: 09/30/2014 - Address: 0xE9A40 - Size: 91584 bytes


NB These DMI properties are set at boot time. Even if your VM gets live-migrated to a host running a different vSphere version, your VM will keep the values it got from the host it booted on. What you see is the vSphere version of the host your VM booted on.

Comments

Popular posts from this blog

How to solve "user locked out due to failed logins" in vSphere vMA

In vSphere 6, if the vi-admin account get locked because of too many failed logins, and you don't have the root password of the appliance, you can reset the account(s) using these steps:

reboot the vMAfrom GRUB, "e"dit the entry"a"ppend init=/bin/bash"b"oot# pam_tally2 --user=vi-admin --reset# passwd vi-admin # Optional. Only if you want to change the password for vi-admin.# exitreset the vMAlog in with vi-admin These steps can be repeated for root or any other account that gets locked out.

If you do have root or vi-admin access, "sudo pam_tally2 --user=mylockeduser --reset" would do it, no reboot required.

Volkswagen UHV bluetooth touch adapter & its problems

My Volkswagen car has the "universal cellphone preparation" UHV built-in. This is the main part of a car kit, but requires an additional adapter for connecting to a cellphone. At first, I was using an adapter for my good old Nokia 6310, even after I changed to the Nokia E71. Connecting was easy: pair the phone with the "VW UHV" bluetooth entity, and done. This has the phone connected to the car kit at all times, so even non-call-related functions use the car audio system (e.g. voice recognition).
But progress will have its way, no matter what happens. So in comes the "bluetooth touch adapter". Instead of a phone-specific adapter, this is a small touchscreen device that slots into the UHV dashboard mount. Connecting a phone is very different now:
the Bluetooth Touch Adapter connects to the "VW UHV" device via bluetooth
the phone connects to "Touch Adapter" device, also via bluetoothThe device doesn't allow step 2 if step 1 didn't s…

Multiple VLANs on a Synology NAS

Synology, like other SOHO/SMB NAS vendors, touts VLAN functionality with their current DSM 4.1 software. However, the web interface just lets you specify one VLAN tag to use over each eth interface (or bond interface).
Manual approachIn the busybox environment that you can ssh into as root (after enabling ssh through the webinterface), there's all the tools you need to use multiple VLANs over one link (eth or bond), however:
First you insert the 802.1q module into the Linux kernel:
 /sbin/lsmod | /bin/grep -q 8021q || /sbin/insmod /lib/modules/8021q.koThen you add each VLAN you need to every interface (bond0 in this example)
 /sbin/vconfig add bond0 4And finally you can configure IP addresses on every interface.vlan combination (bond0.4 in this example)
 /sbin/ifconfig bond0.4 192.168.4.1 broadcast 192.168.4.255 netmask 255.255.255.0The same type of script would work on a QNAP NAS too, by the way. They offer 8021q.ko and vconfig in their commandline environment as well.
Packets from…