Skip to main content

Microsoft follows Red Hats lead: drops Itanium

Red Hat announced in december 2009 that RHEL support for Intel Itanium was being dropped. On april 2nd, Microsoft announced that Windows 2008 R2 was going to be the last Windows version to support the Itanium platform. A chronicle of a death foretold...

Comments

Popular posts from this blog

How to solve "user locked out due to failed logins" in vSphere vMA

In vSphere 6, if the vi-admin account get locked because of too many failed logins, and you don't have the root password of the appliance, you can reset the account(s) using these steps:

reboot the vMAfrom GRUB, "e"dit the entry"a"ppend init=/bin/bash"b"oot# pam_tally2 --user=vi-admin --reset# passwd vi-admin # Optional. Only if you want to change the password for vi-admin.# exitreset the vMAlog in with vi-admin These steps can be repeated for root or any other account that gets locked out.

If you do have root or vi-admin access, "sudo pam_tally2 --user=mylockeduser --reset" would do it, no reboot required.

Volkswagen UHV bluetooth touch adapter & its problems

My Volkswagen car has the "universal cellphone preparation" UHV built-in. This is the main part of a car kit, but requires an additional adapter for connecting to a cellphone. At first, I was using an adapter for my good old Nokia 6310, even after I changed to the Nokia E71. Connecting was easy: pair the phone with the "VW UHV" bluetooth entity, and done. This has the phone connected to the car kit at all times, so even non-call-related functions use the car audio system (e.g. voice recognition).
But progress will have its way, no matter what happens. So in comes the "bluetooth touch adapter". Instead of a phone-specific adapter, this is a small touchscreen device that slots into the UHV dashboard mount. Connecting a phone is very different now:
the Bluetooth Touch Adapter connects to the "VW UHV" device via bluetooth
the phone connects to "Touch Adapter" device, also via bluetoothThe device doesn't allow step 2 if step 1 didn't s…

Multiple VLANs on a Synology NAS

Synology, like other SOHO/SMB NAS vendors, touts VLAN functionality with their current DSM 4.1 software. However, the web interface just lets you specify one VLAN tag to use over each eth interface (or bond interface).
Manual approachIn the busybox environment that you can ssh into as root (after enabling ssh through the webinterface), there's all the tools you need to use multiple VLANs over one link (eth or bond), however:
First you insert the 802.1q module into the Linux kernel:
 /sbin/lsmod | /bin/grep -q 8021q || /sbin/insmod /lib/modules/8021q.koThen you add each VLAN you need to every interface (bond0 in this example)
 /sbin/vconfig add bond0 4And finally you can configure IP addresses on every interface.vlan combination (bond0.4 in this example)
 /sbin/ifconfig bond0.4 192.168.4.1 broadcast 192.168.4.255 netmask 255.255.255.0The same type of script would work on a QNAP NAS too, by the way. They offer 8021q.ko and vconfig in their commandline environment as well.
Packets from…